The Rowboat Motor Chapter Discussion Board

This page was last updated: 10-Mar-2009 11:22:28

The board has been shut down to new posts. We hope to have another board up within a reasonable
time period that will require a user name and password. This allows us to keep the spamming to an
absolute minimum and among other things, will allow direct upload of pictures so you will not have to
have an online site to store your pics to display them. The layout will be similar to John's Old Mercury
Q&A Board - assuming I can get it working!

To display messages and responses here will take a bit of work on your part but at least you will
have access. When you click on any particular link you likely will get a "404" error message
(unless it happens to have been stored in your computer's cache memory). You may add three s's
as shown below to the URL in the 404 message, click, and it will take you to the old message.

As shown on 404 page:

http://www.pfs-ware.com/talkshop/rbmc/messages/432.html

Add those three s's:

http://www.pfs-ware.com/talkshop/rbmc/messagessss/432.html

Hit enter or click the adjusted hyperlink and it should take you there.

Meanwhile, have patience with us. We'll get at it!

better act fast if you want any information from here - Chris S 10-Mar-2009 07:25:40 (0)

Wisconsin prop wanted - Jack Craib 08-Mar-2009 16:47:04 (0)

1915 Evinrude RBM condenser - Ken B. 08-Mar-2009 15:43:34 (1)

Re: 1915 Evinrude RBM condenser - Chris S 08-Mar-2009 16:37:51 (0)

Garbage posts - Moderator 08-Mar-2009 13:29:46 (0)

Piston rings revisited... - Richard White 07-Mar-2009 14:03:57 (0)

Thanks to moderator... - Richard White 07-Mar-2009 07:59:07 (1)

Re: Thanks to moderator... - Chris S 07-Mar-2009 10:05:30 (0)

Spinaway gear driven mag. - bj pawlaczyk 06-Mar-2009 05:04:12 (0)

1914 RBM In progress - Richard White 05-Mar-2009 11:47:27 (2)

Re: 1914 RBM In progress - George Emmanuel 07-Mar-2009 07:58:42 (0)

Re: 1914 RBM In progress - Jay Walls 05-Mar-2009 16:42:02 (0)

WANTED: - William McIsaac 03-Mar-2009 19:49:04 (0)

Waterman Catalog - William McIsaac 27-Feb-2009 13:52:14 (0)

28 Elto Speedster - Ken B. 24-Feb-2009 19:28:14 (3)

Re: 28 Elto Speedster - Rick Eichrodt 25-Feb-2009 07:09:47 (2)

Re: 28 Elto Speedster - Ken B. 25-Feb-2009 15:46:47 (1)

Re: 28 Elto Speedster - HarryN 25-Feb-2009 23:43:13 (0)

next newsletter - Chris S 20-Feb-2009 17:22:17 (10)

Re: next newsletter - Jay Walls 26-Feb-2009 21:21:21 (0)

Re: next newsletter - Bill G. 26-Feb-2009 07:56:29 (0)

Re: next newsletter - Richard Hiiuvain 23-Feb-2009 19:26:09 (0)

Re: next newsletter - William McIsaac 23-Feb-2009 08:49:34 (0)

Re: next newsletter - Richard White 22-Feb-2009 06:23:46 (0)

Re: next newsletter - Ricjhard Hiiuvain 21-Feb-2009 18:24:08 (0)

Re: next newsletter - Lee 21-Feb-2009 14:10:40 (0)

Re: next newsletter - Ken B. 21-Feb-2009 07:46:07 (0)

Re: next newsletter - Eric H. 20-Feb-2009 18:03:32 (1)

Re: next newsletter - John Fura 23-Feb-2009 11:24:45 (0)

Whats wrong with this 1915 Wisconsin Ad? - HarryN 14-Feb-2009 16:28:15 (3)

Re: Whats wrong with this 1915 Wisconsin Ad? - Tom Manley 14-Feb-2009 20:05:07 (2)

Re: Whats wrong with this 1915 Wisconsin Ad? - Chris S 14-Feb-2009 20:30:59 (1)

Re: Whats wrong with this 1915 Wisconsin Ad? - HarryN 15-Feb-2009 14:46:01 (0)

The earliest Evinrude Centrifugal Pumper? - HarryN 09-Feb-2009 22:34:00 (2)

Re: The earliest Evinrude Centrifugal Pumper? - Chris S 10-Feb-2009 18:28:40 (1)

Re: The earliest Evinrude Centrifugal Pumper? - HarryN 10-Feb-2009 18:56:45 (0)

Didn't even know your guys were here - first rowboat motor - DanK 06-Feb-2009 08:16:45 (1)

Re: Didn't even know your guys were here - first rowboat motor - Chris S 06-Feb-2009 21:58:02 (0)

Poppet valves - Lee 02-Feb-2009 17:40:39 (2)

Re: Poppet valves - Tom G 04-Feb-2009 07:57:38 (0)

Re: Poppet valves - William McIsaac 02-Feb-2009 18:39:40 (0)

Evin RBM coil wanted, working or not - Brian 30-Jan-2009 21:11:00 (0)

Evinrude RBM fly whl key wanted - Brian 30-Jan-2009 21:07:59 (0)

its not too early to plan for the summer eh - ChristopherScratch 29-Jan-2009 21:22:35 (4)

Re: its not too early to plan for the summer eh - Ken B. 01-Feb-2009 17:44:04 (0)

Re: its not too early to plan for the summer eh - Kees 01-Feb-2009 16:30:46 (2)

Re: its not too early to plan for the summer eh - Chris S 01-Feb-2009 21:59:20 (1)

Re: its not too early to plan for the summer eh - Kees 03-Feb-2009 11:49:31 (0)

Caille Neptune RBM - William McIsaac 29-Jan-2009 12:33:14 (0)

Emmons?? - Tom 29-Jan-2009 08:51:39 (5)

Re: Emmons?? - don honea 02-Mar-2009 09:23:47 (0)

Re: Emmons?? - Chris S 29-Jan-2009 09:48:26 (3)

Re: Emmons?? - William McIsaac 29-Jan-2009 10:29:15 (2)

Re: Emmons?? - HarryN 29-Jan-2009 23:26:58 (1)

Re: Emmons?? - William McIsaac 30-Jan-2009 08:15:02 (0)

Evinrude 100th Anniversary - William McIsaac 26-Jan-2009 17:56:33 (2)

Re: Evinrude 100th Anniversary - Richard White 27-Jan-2009 08:03:22 (1)

Re: Evinrude 100th Anniversary - Greg Schmidt 28-Jan-2009 08:26:24 (0)

Update on Evinrude Rowboat Motor Website - Eric Helder 25-Jan-2009 19:52:55 (0)

unidentified carburetor - Chris S 25-Jan-2009 17:32:16 (1)

Re: unidentified carburetor - William McIsaac 25-Jan-2009 18:17:02 (0)

Not a RBM question but....... - Ken B. 25-Jan-2009 17:23:42 (3)

Re: Not a RBM question but....... - George Emmanuel 26-Jan-2009 07:45:34 (1)

Re: Not a RBM question but....... - Ken B. 29-Jan-2009 20:35:06 (0)

antique motor questions perfectly acceptable(NT) - Moderator 25-Jan-2009 17:33:16 (0)

Old Popular Mechanics outboard articles - Eric Helder 24-Jan-2009 10:57:11 (1)

Re: Old Popular Mechanics outboard articles - Eric Helder 24-Jan-2009 11:04:33 (0)

Anybody home? - Dick Gorz 23-Jan-2009 19:34:03 (4)

Re: Anybody home? - William McIsaac 23-Jan-2009 23:50:45 (0)

Re: Anybody home? - Gary 23-Jan-2009 22:50:42 (0)

Re: Anybody home? - outboard_man 23-Jan-2009 20:35:21 (1)

Re: Anybody home? - bj pawlaczyk 26-Jan-2009 05:56:24 (0)

New Piston rings... - Richard White 19-Jan-2009 16:15:55 (0)

Question - Matt B 12-Jan-2009 10:10:34 (2)

Re: Question - Tom G 12-Jan-2009 10:28:51 (1)

Re: Question - Matt B 12-Jan-2009 11:09:58 (0)

Federal & Arrow - HarryN 09-Jan-2009 16:51:09 (3)

Re: Federal & Arrow - Jack Craib 09-Jan-2009 22:03:02 (2)

Re: Federal & Arrow - HarryN 10-Jan-2009 16:51:03 (1)

Re: Federal & Arrow - roger debiasi 11-Jan-2009 18:45:17 (0)

RBM starter knob hardware - Richard White 05-Jan-2009 13:23:14 (1)

Bob Skinner I am told he makes these... - Richard White 05-Jan-2009 17:04:49 (0)

RBM flywheel for sale - Richard White 02-Jan-2009 07:51:42 (1)

SOLD - Richard White 03-Jan-2009 07:14:09 (0)

Popular Mechanics magazines online 1905-2000 - Chris S 28-Dec-2008 05:41:40 (0)

Great reference - William McIsaac 21-Dec-2008 15:21:42 (0)

Speedaway, clone #5 - HarryN 14-Dec-2008 17:23:37 (0)

Rowboat Motor Polishing - Eric H. 11-Dec-2008 20:59:03 (2)

Re: Rowboat Motor Polishing - Chris S 12-Dec-2008 06:02:33 (1)

Re: Rowboat Motor Polishing - c.craftlee 12-Dec-2008 16:55:29 (0)

Spare scrap parts....... - Richard White 11-Dec-2008 14:09:43 (5)

Re: Spare scrap parts....... - Mickey Mobster 11-Dec-2008 14:24:41 (2)

Fun project.. - Richard White 12-Dec-2008 09:05:52 (0)

Re: Spare scrap parts....... - Richard White 11-Dec-2008 14:25:26 (0)

If it works you could convince me to give ya the cylinder back :)(NT) - Richard White 11-Dec-2008 14:13:06 (1)

Re: If it works you could convince me to give ya the cylinder back ... - MM Again 11-Dec-2008 14:26:24 (0)

Constantine Super Meet 2009 - Rick Eichrodt 10-Dec-2008 22:30:49 (0)

WANTED: Waterman paperwork - William McIsaac 10-Dec-2008 15:18:48 (1)

Re: Waterman - HarryN 10-Dec-2008 17:18:16 (0)

repro connecting rods for the ole Evinrudes? - Richard White 10-Dec-2008 07:12:50 (0)

Gouges in a bore.... - Richard White 10-Dec-2008 06:18:21 (3)

Re: Gouges in a bore.... - Chris S 10-Dec-2008 07:16:27 (2)

Re: Gouges in a bore.... - Richard White 10-Dec-2008 07:41:14 (1)

there is another method - Chris S 10-Dec-2008 12:23:29 (0)

please stay with our format - Tom G 08-Dec-2008 08:14:56 (3)

Re: please stay with our format - Bob Huff 09-Dec-2008 07:53:33 (0)

Re: please stay with our format - Chris S 08-Dec-2008 10:15:52 (1)

Re: please stay with our format - Dick Gorz 08-Dec-2008 14:59:47 (0)

How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Eric 07-Dec-2008 14:38:57 (13)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Richard White 07-Dec-2008 16:59:57 (0)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Chris S 07-Dec-2008 15:30:16 (0)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Eric 07-Dec-2008 14:44:50 (10)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Eric 07-Dec-2008 20:06:36 (9)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Richard White 08-Dec-2008 04:53:39 (0)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Jack Craib 07-Dec-2008 20:54:52 (7)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Eric 08-Dec-2008 17:30:30 (6)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Jack Craib 08-Dec-2008 18:51:59 (5)

Jacks Image - ODB 09-Dec-2008 08:08:20 (0)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Eric 08-Dec-2008 19:52:09 (3)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Eric 09-Dec-2008 09:04:14 (2)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Jack Craib 09-Dec-2008 16:38:00 (1)

Re: How To Make a Battery Ignition Box for an Evinrude Rowboat Motor? - Eric 09-Dec-2008 17:12:28 (0)

Evinrude Rowboat motor rings revisited... - Richard White 07-Dec-2008 13:28:03 (5)

Re: Evinrude Rowboat motor rings revisited... - John Fura 09-Dec-2008 12:04:03 (0)

Re: Evinrude Rowboat motor rings revisited... - Tom G 08-Dec-2008 07:07:17 (0)

Re: Evinrude Rowboat motor rings revisited... - Old Tubs 07-Dec-2008 14:36:41 (2)

Re: Evinrude Rowboat motor rings revisited... - Old Tubs 07-Dec-2008 14:44:27 (1)

Re: Caille Rowboat motor rings revisited... - HarryN 07-Dec-2008 18:06:45 (0)

1922 Caille Liberty colors - HarryN 06-Dec-2008 15:59:19 (1)

Re: 1922 Caille Liberty colors - Bj pawlaczyk 06-Jan-2009 05:22:57 (0)

Evinrude Rowboat Motor Website Update - Eric 06-Dec-2008 14:47:29 (3)

Re: Evinrude Rowboat Motor Website Update - Eric 06-Dec-2008 16:23:13 (2)

Re: Evinrude Rowboat Motor Website Update - Roger DeBiasi 07-Dec-2008 09:55:23 (1)

Re: Evinrude Rowboat Motor Website Update - Eric 07-Dec-2008 11:34:36 (0)

Chris I would like your input.. - Richard White 05-Dec-2008 06:00:24 (14)

as for what rings fit which machine - Chris S 05-Dec-2008 08:11:26 (0)

Chris... what gives? - Richard White 05-Dec-2008 07:24:17 (12)

Re: Chris... what gives? - John Fura 30-Dec-2008 06:53:28 (0)

Re: Chris... what gives? - Tom 05-Dec-2008 17:58:04 (0)

Tapered ring though - Steve Roskowski 05-Dec-2008 15:38:04 (1)

Re: Tapered ring THOUGHT not though!(NT) - Steve Roskowski 05-Dec-2008 15:39:03 (0)

Re: Chris... what gives? - Chris S 05-Dec-2008 07:57:16 (7)

addendum - Richard White 06-Dec-2008 09:05:17 (0)

Re: Chris... what gives? - Richard White 05-Dec-2008 08:08:24 (5)

Re: Chris... what gives? - Chris S 05-Dec-2008 10:13:57 (1)

Just wann make sure I do it right.... Thanks(NT) - Richard White 05-Dec-2008 10:18:06 (0)

More info....important - Richard White 05-Dec-2008 08:11:50 (2)

Re: Even More info....important - Richard White 05-Dec-2008 08:23:06 (1)

Re: Even More info....important - Rick Eichrodt 06-Dec-2008 19:53:19 (0)

Piston rings available........for your engine no matter how old.. - Richard White 05-Dec-2008 05:54:08 (0)

Model B RBM - George Emmanuel 04-Dec-2008 20:15:07 (4)

Re: Model B RBM - Tom 05-Dec-2008 17:51:50 (1)

Re: Model B RBM - George Emmanuel 05-Dec-2008 19:29:24 (0)

Re: Model B RBM - Chris S 04-Dec-2008 21:14:22 (1)

Re: Model B RBM - George Emmanuel 05-Dec-2008 08:14:56 (0)

Piston Rings - Richard White 04-Dec-2008 05:21:11 (0)

Evinrude Rowboat Motor Website - Eric 03-Dec-2008 18:48:58 (4)

Re: Evinrude Rowboat Motor Website - Kees 04-Dec-2008 17:30:36 (3)

Re: Evinrude Rowboat Motor Website - Chris S 05-Dec-2008 05:52:29 (0)

Re: Evinrude Rowboat Motor Website - Skeg 04-Dec-2008 22:03:57 (1)

Re: Evinrude Rowboat Motor Website - kees 05-Dec-2008 11:45:59 (0)

Evinrude Rowboat Motor Questions - Eric 02-Dec-2008 18:08:30 (3)

Re: Evinrude Rowboat Motor Questions - Rick Eichrodt 03-Dec-2008 07:51:02 (1)

Re: Evinrude Rowboat Motor Questions - Chris S 03-Dec-2008 14:29:46 (0)

Re: Evinrude Rowboat Motor Questions - Greg Schmidt 02-Dec-2008 18:16:40 (0)

MotorGo decals? - Tom G 01-Dec-2008 08:13:53 (14)

Re: MotorGo decals? - c.craftlee 01-Dec-2008 17:43:29 (8)

Re: MotorGo decals? - Greg Schmidt 01-Dec-2008 19:25:37 (7)

OK, here's a mystery to solve - Chris S 01-Dec-2008 19:50:24 (6)

Re: OK, here's a mystery to solve - Greg Schmidt 01-Dec-2008 21:18:58 (0)

Re: OK, here's a mystery to solve - c.craftlee 01-Dec-2008 20:36:05 (4)

Re: OK, here's a mystery to solve - Chris S 01-Dec-2008 21:49:23 (0)

Re: OK, here's a mystery to solve - Greg Schmidt 01-Dec-2008 21:39:40 (2)

Re: OK, here's a mystery to solve - c.craftlee 02-Dec-2008 12:09:38 (0)

Re: OK, here's a mystery to solve - c.craftlee 02-Dec-2008 09:11:00 (0)

Re: MotorGo decals? - Chris S 01-Dec-2008 08:32:44 (3)

Re: MotorGo decals? - Tom G 02-Dec-2008 09:29:37 (0)

Re: MotorGo decals? - Tom G 02-Dec-2008 09:28:08 (1)

Re: MotorGo/ decals mystery? - Greg Schmidt 02-Dec-2008 18:11:17 (0)

Re: MotorGo decals? - Greg Schmidt 01-Dec-2008 08:17:19 (0)

Another headache for Chris, or : Is this a RBM ? - HarryN 28-Nov-2008 19:33:55 (1)

my vote - RBM! - Chris S 29-Nov-2008 15:15:11 (0)

Evinrude Grey color - Greg Schmidt 28-Nov-2008 13:00:54 (4)

Re: Evinrude Grey color - Chris S 29-Nov-2008 15:14:00 (3)

Re: Evinrude Grey color - Roger DeBiasi 01-Dec-2008 16:09:22 (0)

Re: Evinrude Grey color - Greg Schmidt 30-Nov-2008 09:35:09 (1)

Re: Evinrude Grey color - John Fura 02-Dec-2008 11:44:25 (0)

Happy Thanksgiving to our US members - Chris S 27-Nov-2008 19:39:38 (0)

I have some extra unnecessary RBM parts - William McIsaac 26-Nov-2008 09:17:01 (0)

Spinaway - HarryN 21-Nov-2008 00:32:09 (5)

Re: Spinaway - Chris S 21-Nov-2008 15:04:57 (0)

Re: Spinaway - Richard White 21-Nov-2008 05:31:21 (3)

Re: Northwestern - HarryN 21-Nov-2008 21:50:17 (2)

Re: Northwestern - Chris S 21-Nov-2008 22:05:02 (1)

Saving pics - Richard White 22-Nov-2008 09:07:32 (0)

Evinrude need lots of help - Jeff_G 20-Nov-2008 12:57:49 (2)

Re: Evinrude need lots of help - Chris S 20-Nov-2008 13:25:08 (0)

Re: Evinrude need lots of help - Richard White 20-Nov-2008 13:24:28 (0)

Weed Cutter Dream - HarryN 13-Nov-2008 23:09:32 (3)

Re: Weed Cutter Dream - Greg Schmidt 14-Nov-2008 07:21:22 (2)

Re: Weed Cutter Dream - bj pawlaczyk 15-Nov-2008 18:31:26 (1)

Re: Weed Cutter Dream - Greg Schmidt 16-Nov-2008 08:26:57 (0)

crankshaft repair - Dave Bono 13-Nov-2008 18:58:55 (3)

Re: crankshaft repair - Chris S 13-Nov-2008 21:13:37 (1)

Re: crankshaft repair - Dave Bono 14-Nov-2008 08:53:09 (0)

Re: crankshaft repair - Rick Eichrodt 13-Nov-2008 19:41:11 (0)

rowboat motors; the book - Roeland den Daas 13-Nov-2008 09:23:29 (1)

Re: rowboat motors; the book - HarryN 13-Nov-2008 22:09:21 (0)

RBM crankshaft repair - Dave Bono 12-Nov-2008 10:22:07 (3)

Re: RBM crankshaft repair - Chris S 12-Nov-2008 17:20:27 (0)

Re: RBM crankshaft repair - Richard White 12-Nov-2008 11:11:07 (1)

Re: RBM crankshaft repair - Dave Bono 12-Nov-2008 11:36:32 (0)

just an idea for a "chapter function" - Chris S 11-Nov-2008 07:47:54 (4)

Re: just an idea for a "chapter function" - George Emmanuel 11-Nov-2008 18:06:02 (1)

Re: just an idea for a "chapter function" - Chris S 11-Nov-2008 19:27:14 (0)

Re: just an idea for a "chapter function" - William McIsaac 11-Nov-2008 13:22:24 (1)

Re: just an idea for a "chapter function" - Chris S 12-Nov-2008 07:10:18 (0)

Rowboat motor part interchange - Chris S 10-Nov-2008 20:08:44 (1)

Re: Rowboat motor part interchange - Tom G 11-Nov-2008 06:50:02 (0)

How far have you gone with yer RBM? - Ken B. 10-Nov-2008 17:33:37 (8)

Re: How far have you gone with yer RBM? - Rick Eichrodt 10-Nov-2008 21:28:29 (0)

Re: How far have you gone with yer RBM? - George Emmanuel 10-Nov-2008 20:38:19 (4)

100th video - William McIsaac 11-Nov-2008 17:31:14 (0)

Re: How far have you gone with yer RBM? - Ken B. 10-Nov-2008 21:17:59 (2)

Re: How far have you gone with yer RBM? - George Emmanuel 11-Nov-2008 18:01:34 (0)

100th anniversary movie - Roeland den Daas 11-Nov-2008 03:36:29 (0)

Re: How far have you gone with yer RBM? - Chris S 10-Nov-2008 19:58:02 (1)

Re: How far have you gone with yer RBM? - Ken B. 10-Nov-2008 21:16:16 (0)

Rowboat Motor Starting knobs... - Richard White 10-Nov-2008 12:53:29 (2)

Re: Rowboat Motor Starting knobs... - John Fura 12-Nov-2008 10:41:06 (1)

exactly the kind of thing we need(NT) - Chris S 12-Nov-2008 19:08:53 (0)

New RBM video hot off the press. - Ken B. 08-Nov-2008 15:40:44 (3)

Re: New RBM video hot off the press. - Richard Hiiuvain 09-Nov-2008 19:29:59 (0)

Re: New RBM video hot off the press. - Chris S 08-Nov-2008 18:37:08 (1)

Custom ringtones - Don Saulsbury 08-Nov-2008 20:06:05 (0)

publicizing the board - Chris Scratch 07-Nov-2008 15:57:14 (5)

Re: publicizing the board - George Emmanuel 07-Nov-2008 16:36:42 (4)

Re: publicizing the board - Ken B. 07-Nov-2008 17:43:02 (2)

Re: publicizing the board - Rick Eichrodt 07-Nov-2008 20:48:11 (1)

Re: publicizing the board - Ken B. 08-Nov-2008 08:16:53 (0)

Re: publicizing the board - Chris S 07-Nov-2008 17:10:44 (0)

members Discussion Board - George Emmanuel 06-Nov-2008 18:00:40 (1)

Re: members Discussion Board - Rick Eichrodt 06-Nov-2008 21:10:27 (0)

RBM update... - Richard White 06-Nov-2008 07:32:46 (3)

Re: RBM update... - Bob Grubb 07-Nov-2008 18:48:13 (1)

Re: RBM update... - Richard White 08-Nov-2008 06:53:34 (0)

Re: RBM update... - Chris S 06-Nov-2008 08:17:24 (0)

Rustconsin update - Chris S 05-Nov-2008 20:53:12 (1)

Re: Rustconsin update - Rick Eichrodt 06-Nov-2008 08:12:01 (0)

STARTER KNOBS,anyone sell for evinrude - Brian Shillito 05-Nov-2008 15:24:34 (2)

Re: STARTER KNOBS,anyone sell for evinrude - Chris S 05-Nov-2008 20:38:37 (0)

Re: STARTER KNOBS,anyone sell for evinrude - Richard White 05-Nov-2008 18:08:18 (0)

RBMs at the Suter Meet - Bill McIsaac 30-Oct-2008 14:59:18 (4)

Re: RBMs at the Suter Meet - Rick Eichrodt 30-Oct-2008 21:12:37 (0)

Re: RBMs at the Suter Meet - Deane Rogers 30-Oct-2008 18:35:44 (2)

Re: RBMs at the Suter Meet - bj pawlaczyk 31-Oct-2008 03:01:25 (0)

Re: RBMs at the Suter Meet - bj pawlaczyk 31-Oct-2008 02:55:05 (0)

coil winding - Fred Truntz 28-Oct-2008 13:12:12 (2)

Re: coil winding - Chris S 28-Oct-2008 20:48:23 (1)

Re: coil winding - Jay Walls 28-Oct-2008 22:31:29 (0)

Look what I just got - Richard Hiiuvain 25-Oct-2008 18:16:35 (3)

Re: Dragonfly Sled - HarryN 11-Nov-2008 21:44:59 (0)

Re: Look what I just got - Bill McIsaac 26-Oct-2008 11:05:24 (0)

Re: Look what I just got - Richard Hiiuvain 25-Oct-2008 18:18:38 (0)

The Suter met Nov. 1st - bj pawlaczyk 23-Oct-2008 06:38:17 (4)

Re: The Suter met Nov. 1st - Jay Walls 28-Oct-2008 22:35:23 (2)

Re: The Suter met Nov. 1st - bj pawlaczyk 29-Oct-2008 06:06:51 (1)

Re: The Suter met Nov. 1st - Jay Walls 01-Nov-2008 19:38:10 (0)

Re: The Suter met Nov. 1st - Richard White 23-Oct-2008 08:29:05 (0)

quiz - Jack Craib 22-Oct-2008 16:19:35 (6)

Re: quiz - Dave Bono 23-Oct-2008 09:59:14 (0)

Re: quiz - Richard White 23-Oct-2008 05:14:09 (0)

Re: quiz - Chris S 22-Oct-2008 16:40:15 (3)

Re: quiz - Bill McIsaac 22-Oct-2008 20:31:30 (0)

Re: quiz - Jack Craib 22-Oct-2008 17:01:05 (1)

Re: quiz - Dave Bono 22-Oct-2008 20:27:37 (0)

MOB River Cruise - Rick Eichrodt 19-Oct-2008 08:39:53 (3)

Re: MOB River Cruise - Rick Eichrodt 21-Oct-2008 21:38:39 (2)

Re: MOB River Cruise - Chris S 22-Oct-2008 15:01:26 (1)

Re: MOB River Cruise - Rick Eichrodt 22-Oct-2008 18:24:12 (0)

New Motor - Rick Eichrodt 16-Oct-2008 19:38:08 (0)

Motor in the newsletter... - Richard White 16-Oct-2008 11:28:02 (2)

Re: Motor in the newsletter... - Bill McIsaac 16-Oct-2008 12:42:41 (1)

also sold as a Northwestern (NT) - Chris S 20-Oct-2008 14:45:32 (0)

Newsletter Second Edition - Chris Scratch 16-Oct-2008 09:48:10 (3)

Re: Newsletter Second Edition - Jack Craib 16-Oct-2008 11:54:13 (2)

Re: Newsletter Second Edition - Chris S 16-Oct-2008 12:38:54 (1)

Re: Newsletter Second Edition - Jack Craib 16-Oct-2008 18:21:16 (0)

different style Evinrude RBM gas tank - Chris Scratch 15-Oct-2008 18:23:56 (2)

Re: different style Evinrude RBM gas tank - Richard Hiiuvain 15-Oct-2008 19:57:42 (1)

Re: different style Evinrude RBM gas tank - Tom G 16-Oct-2008 07:48:11 (0)

wisconsin gearfoot - Dave Bono 12-Oct-2008 07:42:32 (5)

Re: wisconsin gearfoot - Richard Hiiuvain 15-Oct-2008 19:59:55 (4)

Re: wisconsin gearfoot - Dave Bono 15-Oct-2008 20:36:26 (3)

Re: wisconsin gearfoot - Richard White 16-Oct-2008 03:56:00 (2)

Re: wisconsin gearfoot - Dave Bono 16-Oct-2008 09:42:15 (1)

Re: wisconsin gearfoot - Richard White 16-Oct-2008 18:33:51 (0)

Ferro prop - Fred Truntz 11-Oct-2008 10:04:26 (0)

how to post photo - Dave Bono 10-Oct-2008 19:17:49 (1)

Re: how to post photo - Chris S 10-Oct-2008 20:50:05 (0)

used Wisconsin rowboat motor, let the lesson be learned (again!) - Chris Scratch 07-Oct-2008 10:15:31 (9)

Rustconsin High Compression Motor - Chris S 07-Oct-2008 20:32:58 (2)

Re: Rustconsin High Compression Motor - Dave Bono 08-Oct-2008 20:19:46 (1)

Re: Rustconsin High Compression Motor - Chris S 08-Oct-2008 20:29:43 (0)

Re: used Wisconsin rowboat motor, let the lesson be learned (again!) - Richard Hiiuvain 07-Oct-2008 14:12:05 (3)

Re: used Wisconsin rowboat motor, let the lesson be learned (again!) - Steve Roskowski 09-Oct-2008 10:57:28 (2)

Lockwood update - Steve Roskowski 16-Oct-2008 07:22:39 (1)

Re: Lockwood update part II - Steve Roskowski 22-Oct-2008 10:40:47 (0)

Re: used Wisconsin rowboat motor, let the lesson be learned (again!) - Richard White 07-Oct-2008 14:12:05 (0)

Re: used Wisconsin rowboat motor, let the lesson be learned (again!) - Tom G 07-Oct-2008 12:10:55 (0)

evinrude serial number plate - Dave Bono 06-Oct-2008 20:00:40 (5)

Re: evinrude serial number plate - Chris S 07-Oct-2008 04:17:04 (4)

Re: evinrude serial number plate - Dave Bono 07-Oct-2008 17:56:36 (3)

Re: evinrude serial number plate - Chris S 07-Oct-2008 20:06:55 (2)

Re: evinrude serial number plate - Dave Bono 08-Oct-2008 20:11:01 (1)

Re: evinrude serial number plate - Chris S 09-Oct-2008 15:53:27 (0)

Koban - bj pawlaczyk 01-Oct-2008 05:25:38 (10)

Re: Koban - Bill Macnamara 05-Oct-2008 02:17:13 (5)

Re: Koban - Chris S 05-Oct-2008 07:14:19 (3)

Re: Koban - Bill Macnamara 05-Oct-2008 16:16:13 (2)

Re: Koban - Chris S 05-Oct-2008 16:57:53 (1)

Re: Koban - Bill Macnamara 05-Oct-2008 18:06:53 (0)

Re: Koban - Chris S 05-Oct-2008 06:50:34 (0)

Re: Koban - Tom G 04-Oct-2008 15:50:32 (0)

Re: Koban - Chris Scratch 01-Oct-2008 06:08:35 (2)

Re: Koban - Tom G 01-Oct-2008 07:53:21 (1)

Re: Koban - Chris S 01-Oct-2008 10:52:28 (0)

Looking for photos..... - Richard White 30-Sep-2008 13:42:10 (0)

More than 1? - Richard White 29-Sep-2008 11:29:01 (6)

Re: More than 1? - Dave Bono 30-Sep-2008 20:57:17 (0)

is there a story? - Chris Scratch 29-Sep-2008 17:34:30 (1)

Re: is there a story? - Richard White 30-Sep-2008 09:39:20 (0)

Re: More than 1? - Tom G 29-Sep-2008 15:46:41 (0)

Re: More than 1? - Richard Hiiuvain 29-Sep-2008 14:36:24 (0)

Re: More than 1? - Chris S 29-Sep-2008 12:39:18 (0)

A rare sighting - Richard Hiiuvain 27-Sep-2008 20:18:08 (7)

Re: A rare sighting - George Emmanuel 29-Sep-2008 08:45:10 (4)

Re: A rare sighting - RichardHiiuvain 29-Sep-2008 16:23:29 (2)

Re: A rare sighting - bj pawlaczyk 29-Sep-2008 20:09:47 (1)

Re: A rare sighting - Richard Hiiuvain 30-Sep-2008 17:26:23 (0)

Re: A rare sighting - Tom G 29-Sep-2008 15:45:30 (0)

Re: A rare sighting - Jack Craib 27-Sep-2008 21:15:17 (0)

For real this one works(NT) - Richard Hiiuvain 27-Sep-2008 20:33:40 (0)

aluminum rowboat motor crankcase identification - Chris Scratch 27-Sep-2008 11:59:21 (3)

Re: aluminum rowboat motor crankcase identification - Richard Hiiuvain 27-Sep-2008 18:06:39 (0)

Re: aluminum rowboat motor crankcase identification - Richard Hiiuvain 27-Sep-2008 17:59:13 (1)

Re: Model K aluminum rowboat motor crankcase - HarryN 12-Nov-2008 13:09:48 (0)

Newsletter contributions - Chris S 26-Sep-2008 05:15:06 (0)

Rowboat motor of the day - Jack Craib 25-Sep-2008 14:06:20 (2)

Re: Rowboat motor of the day - Jack Craib 27-Sep-2008 16:02:40 (0)

Re: Rowboat motor of the day - Chris S 25-Sep-2008 15:19:03 (0)

RBM statistics... - Richard White 25-Sep-2008 11:16:15 (2)

Some probably won't mind and some may prefer not to - Chris S 25-Sep-2008 13:01:49 (0)

Re: RBM statistics... - Rick Eichrodt 25-Sep-2008 12:30:38 (0)

RBM site - Tom G 24-Sep-2008 15:55:47 (3)

Re: RBM site - Chris S 25-Sep-2008 06:45:54 (0)

Re: RBM site - Dick Gorz 24-Sep-2008 18:30:27 (0)

Re: RBM site - Bill McIsaac 24-Sep-2008 16:19:09 (0)

Site Update - again (arrrgh!) - Dick Gorz 24-Sep-2008 11:25:13 (3)

Re: Site Update - again (arrrgh!) - bj pawlaczyk 24-Sep-2008 21:30:12 (0)

Re: Site Update - again (arrrgh!) - Bill McIsaac 24-Sep-2008 12:43:57 (1)

Re: Site Update - again (arrrgh!) - Richard White 24-Sep-2008 13:30:49 (0)

Then that opens this door.... - Richard White 17-Sep-2008 10:01:41 (3)

Re: Then that opens this door.... - Richard White 17-Sep-2008 10:16:00 (2)

you wascawwy wabbit - Chris S 17-Sep-2008 10:19:33 (1)

Re: You should be werkin! - Richard White 17-Sep-2008 10:56:36 (0)

This board can also serve as a RBM Classified Ads - Chris Scratch 17-Sep-2008 07:00:16 (0)

Lake Webster Wet Meet - Austin Duggan 16-Sep-2008 12:24:06 (2)

Re: Lake Webster Wet Meet - Rick Eichrodt 16-Sep-2008 17:03:55 (0)

mention rowboat motors please eh - Chris S 16-Sep-2008 14:16:06 (0)

Gas Valves - George Emmanuel 14-Sep-2008 17:21:24 (2)

Re: Gas Valves - Richard Hiiuvain 14-Sep-2008 18:17:10 (1)

Re: Gas Valves - George Emmanuel 14-Sep-2008 19:14:15 (0)

Model T Celebration - Austin Duggan 12-Sep-2008 08:46:35 (1)

Re: Model T Celebration - Chris Scratch 12-Sep-2008 09:39:09 (0)

Decal Tip - Rick Eichrodt 10-Sep-2008 09:09:32 (1)

Re: Decal Tip - Austin Duggan 10-Sep-2008 14:46:49 (0)

Ferro information - Fred Truntz 09-Sep-2008 10:01:13 (1)

Re: Ferro information - Chris S 09-Sep-2008 17:39:08 (0)

Jason Harrison's RBM web site - Chris Scratch 08-Sep-2008 17:35:28 (0)

can you identify this RBM for me? - nick gebhardt 08-Sep-2008 15:59:05 (4)

Re: can you identify this RBM for me? - Chris Scratch 08-Sep-2008 17:40:53 (3)

Re: can you identify this RBM for me? - nick gebhardt 08-Sep-2008 17:59:04 (1)

Re: can you identify this RBM for me? - Chris S 09-Sep-2008 07:56:37 (0)

Re: can you identify this RBM for me? - nick gebhardt 08-Sep-2008 17:54:04 (0)

Acceptable Posts - Chris Scratch 08-Sep-2008 08:29:32 (7)

Re: Acceptable Posts - Dick Gorz 08-Sep-2008 19:33:16 (0)

Value - William McIsaac 08-Sep-2008 15:33:42 (0)

Re: Acceptable Posts - Question for PM Scratch - Dick Gorz 08-Sep-2008 13:50:14 (4)

Re: Acceptable Posts - Question for PM Scratch - Jack Craib 08-Sep-2008 15:04:31 (1)

Re: Acceptable Posts - Question for PM Scratch - George Emmanuel 08-Sep-2008 16:37:42 (0)

Scratch responds - maybe the members can provide some input. - Chris S 08-Sep-2008 14:24:55 (1)

Re: Scratch responds - maybe the members can provide some input. - Richard H 08-Sep-2008 15:00:04 (0)

quick substitution - George Emmanuel 07-Sep-2008 19:58:13 (0)

Project update - Richard H. 07-Sep-2008 18:23:49 (2)

Re: Project update - Chris S 07-Sep-2008 18:38:24 (1)

Re: Project update - Richard H 07-Sep-2008 19:32:51 (0)

Tip for the day - Richard H 07-Sep-2008 18:20:52 (0)

Question-ring gap on a 1914 - Rick Eichrodt 06-Sep-2008 12:12:32 (6)

Re: Question-ring gap on a 1914 - Tom G 06-Sep-2008 14:13:46 (0)

Re: Question-ring gap on a 1914 - Chris S 06-Sep-2008 13:43:15 (2)

Re: Question-ring gap on a 1914 - RickE 06-Sep-2008 16:24:30 (1)

Re: Question-ring gap on a 1914 - Chris S 06-Sep-2008 16:52:24 (0)

Re: Question-ring gap on a 1914 - Tom G 06-Sep-2008 12:41:08 (1)

Re: Question-ring gap on a 1914 - Rick E 06-Sep-2008 13:05:50 (0)

Motorgo - Tom 05-Sep-2008 15:24:27 (3)

Re: Motorgo - George Emmanuel 05-Sep-2008 19:29:13 (0)

Re: Motorgo - Dick Gorz 05-Sep-2008 18:52:49 (0)

Re: Motorgo - Chris S 05-Sep-2008 16:50:37 (0)

Evinrude RBM - Bill McIsaac 05-Sep-2008 11:17:16 (2)

Re: Evinrude RBM - Bill G 11-Sep-2008 11:52:40 (0)

Re: Evinrude RBM - Chris S 05-Sep-2008 11:22:36 (0)

At Last! - George Emmanuel 04-Sep-2008 21:30:32 (0)

Restoration link - Richard Hiiuvain 04-Sep-2008 19:54:26 (3)

Re: Restoration link by Hiiuvain - Chris S 04-Sep-2008 20:22:11 (2)

Re: Restoration link by Hiiuvain - Chris S 04-Sep-2008 20:23:52 (1)

Sorry, its Dave Reed at Otto Gas Engine Works - Chris S 04-Sep-2008 20:33:28 (0)

Picture - Rick Eichrodt 04-Sep-2008 15:47:56 (1)

More Pictures of RBM's in action - Rick Eichrodt 04-Sep-2008 15:58:11 (0)

torque specs - Chris S 04-Sep-2008 14:45:42 (1)

Re: torque specs - Garry in Tampa 07-Nov-2008 20:06:50 (0)

Earlier the better - Bill McIsaac 04-Sep-2008 08:11:33 (0)

great job guys - Tom Goepfrich 04-Sep-2008 08:09:03 (1)

heavens to Mergatroid - Chris S 04-Sep-2008 11:54:41 (0)

Lets get the ball rolling! - Rick Eichrodt 03-Sep-2008 21:26:16 (6)

Re: Lets get the ball rolling! - Richard White 06-Sep-2008 18:32:41 (1)

you should not restore.... - Chris S 06-Sep-2008 19:19:22 (0)

Re: Lets get the ball rolling! - Bill G 05-Sep-2008 10:43:17 (0)

Re: Lets get the ball rolling! - Richard Hiiuvain 04-Sep-2008 16:40:17 (0)

Re: Lets get the ball rolling! - Jack Craib 04-Sep-2008 15:28:04 (0)

Re: Lets get the ball rolling! - Chris S 04-Sep-2008 08:11:21 (0)

Re: Welcome relief - Mark Suter 04-Sep-2008 07:03:15 (1)

Re: Welcome relief - Rick Eichrodt 04-Sep-2008 07:34:20 (0)

wonderful board - Brian Shillito 03-Sep-2008 20:16:48 (0)

Congrads - Richard Hiiuvain 03-Sep-2008 20:07:46 (0)

Rowboat motors - Roger DiRuscio 03-Sep-2008 19:56:12 (0)

new board - Jay Walls 03-Sep-2008 19:44:19 (1)

Re: new board - Richard White 03-Sep-2008 19:51:28 (0)

welcome aboard - Chris Scratch 03-Sep-2008 19:22:17 (0)